Ascensa low rise platform lift

Overcome accessibility barriers
Accessibility platform lift

Ascensa low rise open platform lift is designed and manufactured in New Zealand; suitable for a range of applications with a maximum rise of up to 1.0 metre.
It is the perfect solution for accessing mezzanine floors and auditorium/school stages.

Available in three platform sizes that can each comfortably accommodate a wheelchair. The unobtrusive access solution is a free standing design that bolts directly to a concrete pad or timber floor and is pre-assembled and bolted into place making it an ideal accessibility solution for existing or new buildings.

Compact Design, Easy Installation

Fully Compliant

Suitable for Indoor and Outdoor

ascensa 340 platform lift from shotton lifts

Rated Load

260 – 500kg

Travel Height

1 M

Capacity

1 – 5 person

Landings

2

Drive System

Hydraulic

Power Supply

Single phase

Platform size

Up to 1100mm x 1400mm

Door Configuration

Swing door (left or right manual)

Compliant to Standard

AS 1735.14

Car Type

Through or Corner

DDA COMPLIANT
IMPORTED LIFT
NDIS APPROVED PROVIDER

What is an Ascensa low rise platform lift?

Ascensa Low rise lifts are an open platform design manufactured in New Zealand to Australian Standards.

  • Compact design, limited site preparation, easy to install
  • Comes with a range of models suitable for rises up to 1 m,
  • Suitable for both indoor and outdoor environment. .
  • Complaint to AS 1735.14

Why should I choose an Ascensa low rise platform lift?

If you require accessibility into a commercial space with a rise of up to 1.0 metre, the Ascensa meets your indoor and outdoor requirements. It is designed to meet the required Building and Accessibility standards and its compact design makes it easy to install with minimal site works.

  • Compliant to Australian Standards and Deisgn Registered
  • AS 1735.14 Low rise platforms for passengers
  • Disability (Access to Premises – Buildings) Standards 2010
  • Certificate of Plant Design Registration – NSW Govt
  • Compliance with International Disability Codes and recommendations
  • Compliant with the Australian Building Code

Features

  • 1.0 metre maximum rise
  • Compact design
  • Usable platform size including 1000 mm x 1200 mm & BCA / DDA compliant 1100mm x 1400mm.
  • Maximum rated load from 260kg to 500 kg
  • Limited site preparation and easy to install
  • Suitable for Indoor and Outdoor environments
  • Compliant to Australian Standards AS 1735.14
  • Easy to operate
  • Built in Safety features
  • Battery power in event of power outage
  • Suits health and disability sector
 

Safety

Compliant to Australian Standards and Deisgn Registered

  • AS 1735.14 Low rise platforms for passengers
  • Disability (Access to Premises – Buildings) Standards 2010
  • Certificate of Plant Design Registration – NSW Govt
  • Compliance with International Disability Codes and recommendations
  • Compliant with the Australian Building Code
  • Compliance documentation is available

Installation

  • Free-standing design that bolts directly onto a concrete pad or timber floor without the need for a pit, bore or load bearing wall
  • Limited site preparation and easy installation
  • Easy connection to a standard power supply (RCD protected)

Purchasing and Installation Process >

Service & maintenance

  • Maintenance Agreement Service Intervals available include—monthly, quarterly, 6 monthly and yearly incorporating access to a 24 hour call centre.

    Servicing and Maintenance >