Overcome accessibility barriers
ASCENSA LOW RISE PLATFORM LIFT
Accessibility Platform Lift
Ascensa low rise lift is an open platform lift designed and manufactured in New Zealand; suitable for a range of applications with a maximum rise of up to 1.0 metre.
It is the perfect solution for accessing mezzanine floors and auditorium/school stages.
• Compact Design, Easy Installation
• Fully Compliant
• Suitable for Indoor and Outdoor

What is a Ascensa Low Rise Platform Lift?
Ascensa Low rise lifts are an open platform design manufactured in New Zealand to Australian Standards.
- Compact design, limited site preparing, easy to install
- comes with a range of models suitable for rises up to 1 m,
- Suitable for both indoor and outdoor environment. .
- Complaint to AS1735.14
Why should I choose a Ascensa Low Rise Platform Lift?
If you require accessibility into a commercial space with a rise of up to 1.0 metre, the Ascensa meets your indoor and outdoor requirements. It is designed to meet the required Building and Accessibility standards and its compact design makes it easy to install with minimal site works.
- Compliant to Australian Standards and Deisgn Registered
- AS 1735.14 Low rise platforms for passengers
- Disability (Access to Premises – Buildings) Standards 2010
- Certificate of Plant Design Registration – NSW Govt
- Compliance with International Disability Codes and recommendations
- Compliant with the Australian Building Code
FEATURES
- 1.0 metre maximum rise
- Compact design
- Usable platform size including 1000 mm x 1200 mm & BCA / DDA compliant 1100mm x 1400mm.
- Maximum rated load from 260kg to 500 kg
- Limited site preparation and easy to install
- Suitable for Indoor and Outdoor environments
- Compliant to Australian Standards AS1735.14
- Easy to operate
- Built in Safety features
- Battery power in event of power outage
- Suits health and disability sector


SAFETY
Compliant to Australian Standards and Deisgn Registered
- AS 1735.14 Low rise platforms for passengers
- Disability (Access to Premises – Buildings) Standards 2010
- Certificate of Plant Design Registration – NSW Govt
- Compliance with International Disability Codes and recommendations
- Compliant with the Australian Building Code
- Compliance documentation is available
INSTALLATION
- Free-standing design that bolts directly onto a concrete pad or timber floor without the need for a pit, bore or load bearing wall
- Limited site preparation and easy installation
- Easy connection to a standard power supply (RCD protected)


SERVICE & MAINTENANCE
Maintenance Agreement Service Intervals available include—monthly, quarterly, 6 monthly and yearly incorporating access to a 24 hour call centre.
DESIGNED IN NZ
MANUFACTURED IN NZ
NDIS APPROVED PROVIDER

Distributed, Installed & Serviced By:
Victoria Sales Office & Showroom
Unit 3, 147 Greens Rd Dandenong Sth VIC 3175
Phone: 03 8725 1025
Queensland Sales Office
21 -26 Octal Street Yatala QLD 4207
Phone: 1800 QLD LIFTS
Mobile: 0488 498 474
Email Sales: sales@shottonlifts.com.au
Email Service: service@shottonlifts.com.au